VarseoSmile Crown ^plus

Specially for the resin developed printing and processing parameters ensure an accurate fit and smooth production sequences with reproducible results at any time
The chemical and mechanical properties of the material are specially adapted to dental applications
Versatile: as a single crown, as an inlay, onlay and veneer, and as a veneer on metal frameworks
Objects that have already been printed can be adapted and repaired outside the patient‘s mouth while maintaining stability with VarseoSmile Crown ^plus or will simply be reprinted due to low material costs
Minimized resin sedimentation for easy handling, no mixing or shaking necessary with regular use
Easy to grind and polish by using standard tools
Seven shades according to the proven VITA* classical shades:
A1, A2, A3, B1, B3, C2, D3
FDA 510(k) cleared and fulfills all the requirements for a Class II medical device**
Thanks to the full integration into the digital workflow and the low material costs, a fast supply option with an excellent price-performance ratio is made possible
Validated on many 3D printers from well-known manufacturers

The VarseoSmile Crown ^plus material is used for 3D printing of permanent restorations such as single crowns, inlays, onlays, and veneers for anterior and posterior areas including occlusal surfaces.

Technical Specifications

Color	A1, A2, A3, B1, B3, C2, D3
Density	approx. 1.4 – 1.5 g/cm³
Viscosity	2,500 – 6,000 mPa∙s
Flexural strength	116 – 150 MPa*
Flexural modulus	4,090 MPa
Hardness	≥ 90 Shore D
Water solubility	< 1 µg/mm³
Water sorption	< 12 µg/mm³
Layer thickness	50 μm
Wavelength	385 nm and 405 nm

Chemical composition

Esterification products of 4.4'-isopropylidiphenol, ethoxylated and 2-methylprop-2enoic acid. Silanized dental glass, methyl benzoylformate, diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide.
Total content of inorganic fillers (particle size 0.7 μm) is 30 – 50 % by mass.

Shades

VarseoSmile Crown ^plus is available in seven shades according to the VITA * classical shade system: A1 Dentin / A2 Dentin / A3 Dentin / B1 Dentin / B3 Dentin / C2 Dentin / D3 Dentin

Availability

Availability	Contents***	REF
VarseoSmile Crown ^plus A1	0.5 kg bottle	41107
VarseoSmile Crown ^plus A2	0.5 kg bottle	41108
VarseoSmile Crown ^plus A3	0.5 kg bottle	41109
VarseoSmile Crown ^plus B1	0.5 kg bottle	41110
VarseoSmile Crown ^plus B3	0.5 kg bottle	41111
VarseoSmile Crown ^plus C2	0.5 kg bottle	41112
VarseoSmile Crown ^plus D3	0.5 kg bottle	41113
VarseoSmile Crown ^plus A1	0.25 kg bottle	41117
VarseoSmile Crown ^plus A2	0.25 kg bottle	41118
VarseoSmile Crown ^plus A3	0.25 kg bottle	41119
VarseoSmile Crown ^plus B1	0.25 kg bottle	41120
VarseoSmile Crown ^plus B3	0.25 kg bottle	41121
VarseoSmile Crown ^plus C2	0.25 kg bottle	41122
VarseoSmile Crown ^plus D3	0.25 kg bottle	41123

Light-curing

The light polymerization can be achieved with the BEGO Otoflash (two xenon stroboscopic lamps, flash frequency 10 Hz, light spectrum 300 – 700 nm) or with the HiLite Power*, Fa. Heraeus Kulzer* (one xenon stroboscope lamp, flash frequency 20 Hz, light spectrum 390 – 540 nm).

Required light-curing time

Light-curing device	Light-curing	Comments
BEGO Otoflash (with protective gas)	2 × 1,500 flashes	Turn object between the exposure cycles

Individualization

Preparation

In order to ensure the successful production of restorations from VarseoSmile Crown ^plus the following points must be taken into account prior to preparation:

The preparation boundaries must be clearly visible
In terms of the preparation depth, the minimum wall thicknesses for the restoration of 1 mm must be observed
A chamfer or step preparation is recommended

As a rule, anatomically reduced preparation is recommended. Special care must be taken to ensure that no sharp angles or edges are created in order to avoid stress peaks in the frame material. These should be broken off before taking the impression using a suitable instrument, e.g., a flexible plastic diamond wheel.

Luting

The VarseoSmile Crown ^plus material is used for 3D printing of permanent restorations such as single crowns, inlays, onlays, and veneers for anterior and posterior areas including occlusal surfaces.

DentaGUIDE VarseoWax CAD/Cast

VarseoSmile Crown plus

Indication range

VarseoSmile Crown ^plus